skip to Main Content

Best Side Perf

Starting at $

Side Folding Gates are an excellent means of security and crowd control, allowing visibility for applications that may not be conducive for Coiling Grilles & Doors. Side Folding Gates can accommodate a multitude of special applications such as sweeping radius curved storefronts, corner locations and limited headroom conditions.

  • Perforated panels with 3/16” (5mm) diameter holes providing a 51% visibility and ventilation through the panels.
  • This field is for validation purposes and should be left unchanged.
Category:

Description

  • Full visibility without allowing hands or other objects to reach beyond storefront.
  • Available in several color and finish options – See Construction.
  • Options for locking, pass-through doors and other accessories.
  • Emergency Egress: Bi-part egress door or Full egress door 36” x 80” (where required by local building code).
  • Meets city visibility code requirement. Due to the perforated curtain these doors don’t qualify for wind, fire, smoke and/or sound rating.
WEIGHT

  • Perforated Panels – Weight Per Surface Of Closure = 1,90 lb./sqft = 9,3 kg/m2
  • Load requirements are greater when the closure is in the stacked position.
  • The support structure must be able to carry the weight of a fully stacked closure.
  • Stacked Linear Weight = Weight per surface of closure X height of closure X 8
LISTINGS

  • Meets city visibility code requirement. Due to the perforated curtain these doors don’t qualify for wind, fire, smoke and/or sound rating.
SIZE

  • 30′ wide 30’ high standard construction.
  • Large openings available of 60′ wide or more, consult factory.
CURTAIN

  • The top and bottom of each section is fitted with an aluminum panel 4” (102mm) high. This panel consists of an aluminum extrusion 1/16” (1,6mm) thick and composed of modules with a 15° angle between them to facilitate the operation of the closure.
  • Perforated Panels – The top and bottom of each section is fitted with an aluminum panel 4” high (102mm). This panel consists of an aluminum extrusion 1/16” (1,6mm) thick and composed of modules with a 15° angle between them to facilitate the operation of the closure. The curtain is constructed of 6” (152mm) wide modules linked together by a continuous aluminum hinge. These hinges hold steel perforated panels with 3/16” (5mm) diameter holes providing a 51% visibility and ventilation through the panels.
OPERATION

  • Manually operated – Easily slides into wall pocket.
MATERIALS & FINISHES

  • Curtains have typical exterior finish in Mill Finish, Clear Anodized or White.
  • Additional options include: Galvanized, Stainless Steel, Galvalume and Powder-Coated.
  • Exterior skin is available in 1/16″ thickness.
STACKING

  • Stacking shall not exceed a depth of 1.15” per foot of closure width plus 3” for each post (lead, end or intermediate). (95mm/lin. m + 76mm per post). Full egress doors add 7” (178mm).
  • 4″ – 102mm min clearance both sides of track. If a pocket door is used, the door must not obstruct the entry dimension given.
TRACK

  • A. Curtain shall be hung from an overhead track 1-5/16” (33mm) wide by 1-9/16” (40mm) high. Track shall be tempered aluminum alloy 6351-T6.
  • B. Curves where required shall be 14” (356mm) radius standard.
TRACK

  • 10” (254mm) radius curves (indicate location on plans).
  • Special radius curves (indicate location and radius on plans).
EGRESS COMPLIANCE

  • Bi-part egress door (bi-part post with interior thumb turn activation); ideal choice.
  • Full egress door 36” x 80” (914mm x 2032mm) where required by local building code. This egress door should be used only when the bi-part egress is refused (extra cost).
LOCKING

  • A. Lead post shall be equipped with a hook bolt lock with cylinders on each side.
  • B. Lead post shall engage a full height wall jamb.
  • C. Trailing post shall be self-locking at the top and bottom inside the storage pocket.
  • D. Free floating intermediate posts shall be located at all curves and at recommended intervals of 10 feet (3m) or 5 feet (1,5m) for counter top units. Intermediate posts shall be equipped with self- adjusting spring loaded drop bolts activated from the inside only. Drop bolts shall engage dustproof stainless steel receptacles.
WIND LOAD

  • Not Applicable.
POCKET REQUIREMENTS

  • Interior pocket width, width 10″ – 254mm is recommended with a standard 14″ – 356mm radius.
WARRANTY

  • 2-year warranty against defects in materials and workmanship. This warranty extends only to the direct purchaser (distributor, wholesaler, or contractor) from Best Rolling Manufacturer and is not transferable.
LOCKING OPTIONS

  • Top and bottom locking posts with key cylinders one or both sides are available for either end of the curtain.
  • Large sections may be divided by incorporating bi-part units as intermediate posts.
  • Second hook bolts on lead, end or bi-parts (recommended for closures over 12’ (3,7m) high or for more security).
 

  • High security or master keyed lock cylinders (customer supplied and factory fitted).
  • Solid aluminum block covering cylinder lock for additional protection (specify cylinder protection).
  • Architect to decide side of lock cylinders.
  • Additional intermediate post with shoot bolt to floor or counter.
Close search

Cart

Back To Top