skip to Main Content

Best Side Classic

Starting at $

Side Folding Gates are an excellent means of security and crowd control, allowing visibility for applications that may not be conducive for Coiling Grilles & Doors. Side Folding Gates can accommodate a multitude of special applications such as sweeping radius curved storefronts, corner locations and limited headroom conditions.

  • This field is for validation purposes and should be left unchanged.
Category:

Description

  • Full visibility without allowing hands or other objects to reach beyond storefront.
  • Available in several color and finish options.
  • Options for locking, pass-through doors and other accessories.
  • Emergency Egress: Bi-part egress door or Full egress door 36” x 80” (where required by local building code).
  • Panels to be perforated for egress door.
  • Meets city visibility code requirement.
  • Due to the openings in curtain these doors don’t qualify for wind, fire, smoke and/or sound rating.
WEIGHT

  • Best Econo-Classic – Weight Per Surface Of Closure = 1,15 lb./sqft = 5,6 kg/m2
  • Best Classic-12 & Classic-525 – Weight Per Surface Of Closure = 1,25 lb/sqft = 6,1 kg/m2
  • Best Guard-Solid – Weight Per Surface Of Closure = 2,15 lb./sqft = 10,5 kg/m2
  • Best Panel-1212 & Panel-99 – Weight Per Surface Of Closure = 1,55 lb./sqft = 7,6 kg/m2
  • Load requirements are greater when the closure is in the stacked position.
  • The support structure must be able to carry the weight of a fully stacked closure.
  • Stacked Linear Weight = Weight per surface of closure X height of closure X 8.
LISTINGS

  • Meets city visibility code requirement. Due to the perforated curtain this door not qualify for wind, fire, smoke and/or sound rating.
SIZE

  • 30′ wide 30’ high standard construction.
  • Large openings available of 60′ wide or more, consult factory.
CURTAIN

  • The top and bottom of each section is fitted with an aluminum panel 4” (102mm) high. This panel consists of an aluminum extrusion 1/16” (1,6mm) thick and composed of modules with a 15° angle between them to facilitate the operation of the closure.
TRACK

  • A. Curtain shall be hung from an overhead track 1-5/16” (33mm) wide by 1-9/16” (40mm) high. Track shall be tempered aluminum alloy 6351-T6.
  • B. Curves where required shall be 14” (356mm) radius standard.
OPERATION

  • Manually operated – Easily slides into wall pocket.
POCKET REQUIREMENTS

  • Interior pocket width 10″ – 254mm is recommended with a standard 14″ – 356mm radius.
STACKING

  • Stacking shall not exceed a depth of 1.15” per foot of closure width plus 3” for each post (lead, end or intermediate), (95mm/lin. m + 76mm per post).
  • Full egress doors add 7” (178mm).
  • 4″- 102mm minimum clearance on both sides of track.
  • If a pocket door is used, the door must not obstruct the entry dimension given.
WIND LOAD

  • Not Applicable.
MATERIALS & FINISHES

  • Curtains have typical exterior finish in Mill Finish, Clear Anodized or White.
  • Additional options include: Galvanized, Stainless Steel, Galvalume and Powder-Coated.
  • Exterior skin is available in 1/16″ thickness.
LOCKING OPTIONS

  • Top and bottom locking posts with key cylinders one or both sides are available for either end of the curtain.
  • Large sections may be divided by incorporating bi-part units as intermediate posts.
  • Second hook bolts on lead, end or bi-parts (recommended for closures over 12’ (3,7m) high or for more security).
  • Solid aluminum block covering cylinder lock for additional protection (specify guard protection).
  • Architect to decide side of lock cylinders.
  • Additional intermediate post with shoot bolt to floor or counter.
EGRESS COMPLIANCE

  • Bi-part egress door (bi-part post with interior thumb turn activation); ideal choice.
  • Full egress door 36” x 80” (914mm x 2032mm); where required by local building code.
  • This egress door should be used only when the bi-part egress is refused (extra cost).
WARRANTY

  • 2-year warranty against defects in materials and workmanship. This warranty extends only to the direct purchaser (distributor, wholesaler, or contractor) from Best Rolling Manufacturer and is not transferable.
DESIGN OPTIONS / CURTAIN PATTERN
Best S-126

  • Open style brick pattern.
  • The curtain is constructed of vertical rods of 5/16” (8mm) in diameter.
  • The spacing between the rods is 2-5/8” (67mm) in a brick pattern.
  • These rods are linked together by flat horizontal bars of 1/8” x 5/8” x 6-5/8” (3mm x 16mm x 168mm).
  • These bars are spaced vertically every 12” (305mm) by aluminum sleeves of 1/2“ (13mm) in diameter.
Best S-12

  • Open style long brick pattern constructed of a combination of rods and solid modules.
  • The curtain is made of vertical rods of 5/16” (8mm).
  • Each rod is contained in an aluminum tube that measures 1/2” (13mm) in diameter.
  • Spaced every 3“ (76mm) these rods are linked by two series of horizontal modules of 2” (51mm) high.
  • These module series are spaced vertically every 12” (305mm).
Best S-525

  • Open style short brick pattern constructed of a combination of rods and solid modules.
  • The curtain is constructed of vertical rods of 5/16” (8mm) diameter spaced out at every 3“ (76mm).
  • These rods are linked together by 2” (51mm) modules spaced vertically every 14” (356mm) by aluminum sleeves of 1/2” (13mm) in diameter.
Best Solid

  • Opaque Style vertical solid slats.
  • The curtain is constructed of 6” (152mm) wide modules linked together by a continuous aluminum hinge.
  • These hinges hold aluminum panels 5-3/8” (136mm) wide and 1/16” (1,6mm) thick completely recessed throughout their full height.
Best 1212

  • Solid style long brick pattern constructed of a combination of rods and solid modules.
  • The curtain is constructed of modules 1/16” (1,6mm) thick arranged in a checkerboard design of 3” (76mm) c/c.
  • These modules are linked together by hidden aluminum and steel rods of 5/16” (8mm) diameter.
  • The height of the panels will be 12” (305mm).
Best 99

  • Solid style short brick pattern constructed of a combination of rods and solid modules.
  • The curtain is constructed of modules 1/16” (1,6mm) thick arranged in a checkerboard design of 3” (76mm) c/c.
  • These modules are linked together by hidden aluminum and steel rods of 5/16” (8mm) diameter.
  • The height of the panels will be 9” (229mm).
Close search

Cart

Back To Top